OP-TEE SPMC implementation
==========================
Introduction
------------
### OP-TEE SPMC implementation
This document describes the OP-TEE SPMC implementation. This
implementation is used to support the Trusted Services PSA SPs. The PSA
SPs are based on the Arm FF-A specifications. The OP-TEE SPMC can be
used as a reference S-EL1 implementation and the Trusted Service can be
used a reference S-EL0 SP implementations.
### FF-A
Arm Firmware Framework for Arm A-profile (FF-A) is a framework designed
to standardize the communication between the various software images.
Including the communication between the various software images in the
Secure world and Normal world. The current release of the OP-TEE SPMC is
based around the [FF-A v1.0
spec](https://developer.arm.com/documentation/den0077/latest.)
### OP-TEE
OP-TEE is an open source Trusted Execution Environment (TEE)
implementing the Arm TrustZone technology. More information can be found
at [readthedocs](https://optee.readthedocs.io/en/latest/) OP-TEE can run both as a S-EL1 SP or as the S-EL1 SPMC.
This document describes OP-TEE as a S-El1 SPMC. The current mainline
OP-TEE version can be found [here](https://github.com/OP-TEE/optee_os)
### Trusted Services
The Trusted Services project provides a framework for developing and
deploying device Root Of Trust (RoT) services across a range of secure
processing environments such as those provided by OP-TEE and Hafnium.
More information about Trusted Service can be found at
[Trusted-Services](https://trusted-services.readthedocs.io/en/latest/)
Current Status
--------------
Limited support for optee spmc aligning with FFA 1.0 is available in mainline and optee 3.16.
Complete support for FFA1.0 and TS is planned for upcoming releases.
See below for status.
### SPMC status
OP-TEE mainline SPMC FF-A status:
| Description | Status|
| --- | ----------- |
|SP loading | Supported |
|SP messaging | Supported |
|SP manifest files | Not Supported |
|Memory management | Supported |
|Interrupts | Not supported |
OP-TEE mainline SPMC FF-A messages status:
------------------------------ -------------------------
|------------------------------|-----------|
| FFA_ERROR | Supported|
| FFA_SUCCESS | Supported|
| FFA_INTERRUPT | Not supported|
| FFA_VERSION | Supported|
| FFA_FEATURES | Supported|
| FFA_RX_RELEASE | Supported|
| FFA_RXTX_MAP | Supported|
| FFA_RXTX_UNMAP | Supported|
| FFA_PARTITION_INFO_GET | Supported|
| FFA_ID_GET | Supported|
| FFA_MSG_WAIT | Supported|
| FFA_YIELD | Not supported|
| FFA_RUN | Not supported|
| FFA_NORMAL_WORLD_RESUME | Not supported|
| FFA_MSG_SEND | Not supported|
| FFA_MSG_SEND_DIRECT_REQ | Supported|
| FFA_MSG_SEND_DIRECT_RESP | Supported|
| FFA_MSG_POLL | Not supported|
| FFA_MEM_DONATE | Not supported|
| FFA_MEM_LEND | Not supported|
| FFA_MEM_SHARE | Partially supported[^1]|
| FFA_MEM_RETRIEVE_REQ | Supported|
| FFA_MEM_RETRIEVE_RESP | Supported|
| FFA_MEM_RELINQUISH | Supported|
| FFA_MEM_RECLAIM | Supported|
[^1]: Device memory is not yet supported.
### Trusted Service status
Currently not all Trusted Service functionality is supported when using
the OP-TEE SPMC v3.16. We are planning to support all functionality over time.
Currently the OP-TEE SPMC supports the following PSA Trusted Services
SPs:
--------------------------- --------------------------------------------------------------------
|----------------------------|--------|
|internal-trusted-storage: |Supported|
|protected-storage: |Supported|
|crypto: |Supported with mock backend. A hardware trngs is not yet supported|
|attestation: |Not yet supported [^2]|
|smm-gateway: |Not yet supported [^3]|
[^2]: The measured boot information is not being passed from TF-A to the attestation SP.
[^3]: Device memory and memory regions in the SP manifest are not mapped.
Build
-----
The build process is based around the [OP-TEE build
process](https://optee.readthedocs.io/en/latest/building/gits/build.html)
with some extra steps.
### Requirements:
- The Trusted Services project has some extra
[requirements](https://trusted-services.readthedocs.io/en/latest/developer/software-requirements.html)
from OP-TEE. It mainly depends on cmake v3.18.
- The current system uses the Arm FVP to run the test environment. The
latest version can be found at
[developer.arm.com](https://developer.arm.com/-/media/Files/downloads/ecosystem-models/FVP_Base_RevC-2xAEMvA_11.16_16.tgz)
The default path for FVP in the build scripts is set to
/opt/fvp/latest
### Build steps
Get the manifest file:
rm -rf optee
mkdir optee
cd optee
repo init -u https://review.trustedfirmware.org/OP-TEE/manifest -m psa-sp-fvp.xml -b topics/spmc_mainline
repo sync -j4 --no-clone-bundle
Build the OP-TEE image:
The OP-TEE build will default be configure to use mainline OP-TEE SPMC.
To be able to build OP-TEE mainline version, it might be needed to
change the SPMC_VERSION to SPMC_VERSION=github in build/fvp_ffa.mk.
Build OP-TEE:
cd build
make toolchains
make
cd ..
Build TS apps:
make -C trusted-services/tools/b-test r-component-test-arm-linux \
r-psa-api-test-crypto-arm-linux \
r-psa-api-test-internal_trusted_storage-arm-linux \
r-psa-api-test-protected_storage-arm-linux \
r-ts-demo-arm-linux \
r-ts-service-test-arm-linux
Copy the TS apps to the shared directory:
cp -r trusted-services/tools/b-test/install/arm-linux shared
More info about building TS-apps can be found at the [Trusted Services
build
instructions](https://trusted-services.readthedocs.io/en/latest/developer/build-instructions.html)
Run fvp:
make -C build run-only
2 console windows should appear, 1 for the Secure World and 1 for the Normal World.
Login as root.
Set up the [fvp
environment](https://trusted-services.readthedocs.io/en/latest/environments/deployment-guides/fvp-deployment-guide.html?highlight=ts-service-test#deploying-service-level-tests):
cd /mnt/
sh load_module.sh
cp arm-linux/lib/libts.so.1 /usr/lib/
# Prepare tests
cd /mnt
./load_module.sh
cp arm-linux/lib/libts.so* /lib
# Run the TS demo
```
./arm-linux/bin/ts-demo
```
Result:
lines=8
Demonstrates use of trusted services from an application
---------------------------------------------------------
A client requests a set of crypto operations performed by
the Crypto service. Key storage for persistent keys is
provided by the Secure Storage service via the ITS client.
Generating random bytes length: 1
Operation successful
Random bytes:
2B
Generating random bytes length: 7
Operation successful
Random bytes:
68 CF 0C 5D 87 C7 11
Generating random bytes length: 128
Operation successful
Random bytes:
BF C6 85 27 81 02 5F 83
60 97 E9 2C A6 30 8E F7
C6 81 44 CB 26 32 8D F5
62 BA 0F DE B8 2C 69 E2
DD C0 FF A0 04 E2 D0 C0
DC EA 11 CE DD 7E 33 87
62 07 89 02 00 68 FC 24
AD D2 E4 86 40 3F 6E 65
83 46 33 9A F8 84 14 3B
72 11 8D 63 59 6F 69 96
70 D2 83 8D 60 6D 9F A2
B3 54 F6 3E 5E B3 FE 07
C9 51 F1 6A F5 B0 0E AA
08 B3 AE F5 06 73 6C 8B
95 73 B2 FF 72 C6 CF 84
12 7A 7A 1F 07 F2 58 71
Generating ECC signing key
Operation successful
Signing message: "The quick brown fox" using key: 256
Operation successful
Signature bytes:
F9 F7 0E D0 4A B2 77 DF
67 40 F5 36 4D 92 38 A3
13 5B 04 A0 6C BD 84 40
03 E2 43 EE BF 6F C6 C4
5B 5D A4 21 D9 EB 17 86
B9 71 0D C9 84 0C FE 55
71 8E 5C F7 D4 7D EB 04
9B 5A 11 D7 46 96 BD A6
Verify signature using original message: "The quick brown fox"
Operation successful
Verify signature using modified message: "!he quick brown fox"
Successfully detected modified message
Signing message: "jumps over the lazy dog" using key: 256
Operation successful
Signature bytes:
45 40 14 E3 39 0C 3B 8A
5F 05 C8 0C E0 B6 A6 D2
8B 5E E3 76 49 DD F1 9E
50 A0 77 6F 1B FA FF C8
38 66 6A 2D 40 B1 79 9C
43 BE 59 F4 48 45 A2 0E
D0 17 3F 1F D3 D7 C0 84
65 AC 9B 8A FB 6E B6 B6
Verify signature using original message: "jumps over the lazy dog"
Operation successful
Verify signature using modified message: "!umps over the lazy dog"
Successfully detected modified message
Generating RSA encryption key
Operation successful
Encrypting message: "Top secret" using RSA key: 257
Operation successful
Encrypted message:
42 B6 53 D8 A3 03 BB 64
66 C0 31 A5 42 2C F8 F3
B8 E3 9C 58 42 7C 2C E0
19 43 F6 02 EB 60 6A DC
Decrypting message using RSA key: 257
Operation successful
Decrypted message: "Top secret"
Exporting public key: 256
Operation successful
Public key bytes:
04 D0 9A AF 76 18 9B 3B
08 38 65 BA 5F 81 B0 85
6A 39 42 19 5F 0D 17 86
CD 7E 2A E6 A4 CC A2 E4
B3 78 89 76 F6 CA 02 12
CB 07 2B AB CF 03 59 B3
34 8D 5D 0F 31 53 E0 68
9D 25 E2 AF 2E 0C 2C BE
51
Destroying signing key: 256
Operation successful
Destroying encryption key: 257
Operation successful
# Run ts-service-test:
```
./arm-linux/bin/ts-service-test -v -xg Attestation
```
Result:
lines=8
TEST(PsServiceTests, createAndSetExtended) - 18029 ms
TEST(PsServiceTests, createAndSet) - 20259 ms
TEST(PsServiceTests, storeNewItem) - 18276 ms
TEST(ItsServiceTests, storeNewItem) - 11099 ms
TEST(CryptoKeyDerivationServicePackedcTests, deriveAbort) - 21819 ms
TEST(CryptoKeyDerivationServicePackedcTests, hkdfDeriveBytes) - 23492 ms
TEST(CryptoKeyDerivationServicePackedcTests, hkdfDeriveKey) - 25032 ms
TEST(CryptoMacServicePackedcTests, macAbort) - 19256 ms
TEST(CryptoMacServicePackedcTests, signAndVerify) - 101831 ms
TEST(CryptoCipherServicePackedcTests, cipherAbort) - 19739 ms
TEST(CryptoCipherServicePackedcTests, encryptDecryptRoundtrip) - 66694 ms
TEST(CryptoHashServicePackedcTests, hashAbort) - 23204 ms
TEST(CryptoHashServicePackedcTests, hashAndVerify) - 34243 ms
TEST(CryptoHashServicePackedcTests, calculateHash) - 17353 ms
TEST(CryptoServicePackedcTests, generateRandomNumbers) - 29636 ms
TEST(CryptoServicePackedcTests, asymEncryptDecryptWithSalt) - 2859988 ms
TEST(CryptoServicePackedcTests, asymEncryptDecrypt) - 234077 ms
TEST(CryptoServicePackedcTests, signAndVerifyEat) - 1060967 ms
TEST(CryptoServicePackedcTests, signAndVerifyHash) - 1072643 ms
TEST(CryptoServicePackedcTests, exportAndImportKeyPair) - 127551 ms
TEST(CryptoServicePackedcTests, exportPublicKey) - 199842 ms
TEST(CryptoServicePackedcTests, purgeKey) - 118558 ms
TEST(CryptoServicePackedcTests, copyKey) - 199131 ms
TEST(CryptoServicePackedcTests, generatePersistentKeys) - 213434 ms
TEST(CryptoServicePackedcTests, generateVolatileKeys) - 188038 ms
TEST(CryptoServiceProtobufTests, generateRandomNumbers) - 31397 ms
TEST(CryptoServiceProtobufTests, asymEncryptDecryptWithSalt) - 4241805 ms
TEST(CryptoServiceProtobufTests, asymEncryptDecrypt) - 267644 ms
TEST(CryptoServiceProtobufTests, signAndVerifyHash) - 1073035 ms
TEST(CryptoServiceProtobufTests, exportAndImportKeyPair) - 127099 ms
TEST(CryptoServiceProtobufTests, exportPublicKey) - 200390 ms
TEST(CryptoServiceProtobufTests, generatePersistentKeys) - 213373 ms
TEST(CryptoServiceProtobufTests, generateVolatileKeys) - 189439 ms
TEST(CryptoServiceLimitTests, volatileRsaKeyPairLimit) - 19765597 ms
TEST(CryptoServiceLimitTests, volatileEccKeyPairLimit) - 5244688 ms
TEST(DiscoveryServiceTests, checkServiceInfo) - 12706 ms
OK (41 tests, 36 ran, 318 checks, 0 ignored, 5 filtered out, 38104375 ms)
# Run components test
```
./arm-linux/bin/component-test -v
```
Results:
lines=8
TEST(UefiVariableStoreTests, noRemoveCheck) - 2915 ms
TEST(UefiVariableStoreTests, readOnlycheck) - 492 ms
TEST(UefiVariableStoreTests, unsupportedAttribute) - 215 ms
TEST(UefiVariableStoreTests, failedNvSet) - 1076 ms
TEST(UefiVariableStoreTests, enumerateStoreContents) - 695 ms
TEST(UefiVariableStoreTests, runtimeAccess) - 542 ms
TEST(UefiVariableStoreTests, bootServiceAccess) - 634 ms
TEST(UefiVariableStoreTests, removePersistent) - 609 ms
TEST(UefiVariableStoreTests, removeVolatile) - 668 ms
TEST(UefiVariableStoreTests, persistentSetGet) - 807 ms
TEST(UefiVariableStoreTests, setGetRoundtrip) - 509 ms
TEST(UefiVariableIndexTests, setCheckConstraintsNonExistingVar) - 303 ms
TEST(UefiVariableIndexTests, setCheckConstraintsExistingVar) - 610 ms
TEST(UefiVariableIndexTests, checkIterator) - 592 ms
TEST(UefiVariableIndexTests, removeVariable) - 321 ms
TEST(UefiVariableIndexTests, dumpBufferTooSmall) - 269 ms
TEST(UefiVariableIndexTests, dumpLoadRoadtrip) - 270 ms
TEST(UefiVariableIndexTests, enumerateStore) - 284 ms
TEST(UefiVariableIndexTests, variableIndexFull) - 347 ms
TEST(UefiVariableIndexTests, addWithOversizedName) - 504 ms
TEST(UefiVariableIndexTests, emptyIndexOperations) - 335 ms
TEST(SfsTests, psCreateAndSetExtended) - 1429 ms
TEST(SfsTests, psCreateAndSet) - 359 ms
TEST(SfsTests, itsStorageLimitTest) - 327 ms
TEST(SfsTests, itsStoreNewItem) - 231 ms
TEST(MockStoreTests, psCreateAndSetExtended) - 223 ms
TEST(MockStoreTests, psCreateAndSet) - 200 ms
TEST(MockStoreTests, itsStorageLimitTest) - 164 ms
TEST(MockStoreTests, itsStoreNewItem) - 211 ms
TEST(SecureStorageProxyTests, psCreateAndSetExtended) - 961 ms
TEST(SecureStorageProxyTests, psCreateAndSet) - 299 ms
TEST(SecureStorageProxyTests, itsStorageLimitTest) - 178 ms
TEST(SecureStorageProxyTests, itsStoreNewItem) - 260 ms
TEST(SecureStorageClientTests, psCreateAndSetExtended) - 314 ms
TEST(SecureStorageClientTests, psCreateAndSet) - 240 ms
TEST(SecureStorageClientTests, itsStorageLimitTest) - 200 ms
TEST(SecureStorageClientTests, itsStoreNewItem) - 261 ms
TEST(CryptoProtocolPackedcChecks, checkKeyUsage) - 16 ms
TEST(CryptoProtocolPackedcChecks, checkKeyLifetime) - 46 ms
TEST(CryptoProtocolPackedcChecks, checkAlg) - 67 ms
TEST(CryptoProtocolPackedcChecks, checkDhGroup) - 40 ms
TEST(CryptoProtocolPackedcChecks, checkEccCurve) - 0 ms
TEST(CryptoProtocolPackedcChecks, checkKeyType) - 87 ms
TEST(CryptoProtocolProtobufChecks, checkKeyUsage) - 82 ms
TEST(CryptoProtocolProtobufChecks, checkKeyLifetime) - 0 ms
TEST(CryptoProtocolProtobufChecks, checkAlg) - 100 ms
TEST(CryptoProtocolProtobufChecks, checkDhGroup) - 51 ms
TEST(CryptoProtocolProtobufChecks, checkEccCurve) - 31 ms
TEST(CryptoProtocolProtobufChecks, checkKeyType) - 0 ms
TEST(CryptoProtocolOpcodeChecks, checkPackedcToProtobuf) - 100 ms
TEST(CryptoKeyDerivationServicePackedcTests, deriveAbort) - 11447 ms
TEST(CryptoKeyDerivationServicePackedcTests, hkdfDeriveBytes) - 2657 ms
TEST(CryptoKeyDerivationServicePackedcTests, hkdfDeriveKey) - 1247 ms
TEST(CryptoMacServicePackedcTests, macAbort) - 1197 ms
TEST(CryptoMacServicePackedcTests, signAndVerify) - 69981 ms
TEST(CryptoCipherServicePackedcTests, cipherAbort) - 954 ms
TEST(CryptoCipherServicePackedcTests, encryptDecryptRoundtrip) - 37124 ms
TEST(CryptoHashServicePackedcTests, hashAbort) - 6279 ms
TEST(CryptoHashServicePackedcTests, hashAndVerify) - 13203 ms
TEST(CryptoHashServicePackedcTests, calculateHash) - 1146 ms
TEST(CryptoServicePackedcTests, generateRandomNumbers) - 2404 ms
TEST(CryptoServicePackedcTests, asymEncryptDecryptWithSalt) - 1703438 ms
TEST(CryptoServicePackedcTests, asymEncryptDecrypt) - 250259 ms
TEST(CryptoServicePackedcTests, signAndVerifyEat) - 1049365 ms
TEST(CryptoServicePackedcTests, signAndVerifyHash) - 1047903 ms
TEST(CryptoServicePackedcTests, exportAndImportKeyPair) - 88124 ms
TEST(CryptoServicePackedcTests, exportPublicKey) - 173495 ms
TEST(CryptoServicePackedcTests, purgeKey) - 86923 ms
TEST(CryptoServicePackedcTests, copyKey) - 195184 ms
TEST(CryptoServicePackedcTests, generatePersistentKeys) - 172863 ms
TEST(CryptoServicePackedcTests, generateVolatileKeys) - 173033 ms
TEST(CryptoServiceProtobufTests, generateRandomNumbers) - 4193 ms
TEST(CryptoServiceProtobufTests, asymEncryptDecryptWithSalt) - 4376499 ms
TEST(CryptoServiceProtobufTests, asymEncryptDecrypt) - 232146 ms
TEST(CryptoServiceProtobufTests, signAndVerifyHash) - 1046828 ms
TEST(CryptoServiceProtobufTests, exportAndImportKeyPair) - 88000 ms
TEST(CryptoServiceProtobufTests, exportPublicKey) - 173672 ms
TEST(CryptoServiceProtobufTests, generatePersistentKeys) - 173569 ms
TEST(CryptoServiceProtobufTests, generateVolatileKeys) - 175136 ms
TEST(CryptoServiceLimitTests, volatileRsaKeyPairLimit) - 19381686 ms
TEST(CryptoServiceLimitTests, volatileEccKeyPairLimit) - 5279943 ms
TEST(CryptoFaultTests, randomNumbersWithBrokenStorage) - 379 ms
TEST(CryptoFaultTests, persistentKeysWithBrokenStorage) - 86573 ms
TEST(CryptoFaultTests, volatileKeyWithBrokenStorage) - 86913 ms
TEST(PocCryptoOpTests, checkOpSequence) - 272394 ms
TEST(CryptoMsgTests, SignHashOutMsgTest) - 378 ms
TEST(CryptoMsgTests, SignHashInMsgTest) - 379 ms
TEST(CryptoMsgTests, ExportPublicKeyOutMsgTest) - 82 ms
TEST(CryptoMsgTests, ExportPublicKeyInMsgTest) - 298 ms
TEST(CryptoMsgTests, GenerateKeyInMsgTest) - 434 ms
TEST(CryptoContextPoolTests, multipleContexts) - 39702 ms
TEST(CryptoContextPoolTests, singleContext) - 43 ms
TEST(CryptoContextPoolTests, checkEmptyPool) - 0 ms
TEST(AttestationProvisioningTests, provisionedIak) - 87233 ms
TEST(AttestationProvisioningTests, selfGeneratedIak) - 259560 ms
TEST(AttestationServiceTests, repeatedOperation) - 19794571 ms
TEST(AttestationServiceTests, invalidChallengeLen) - 174 ms
TEST(AttestationServiceTests, checkTokenSize) - 367889 ms
TEST(AttestationReporterTests, createReport) - 706592 ms
TEST(TcgEventLogTests, interateBootMeasurements) - 189 ms
TEST(DiscoveryServiceTests, checkServiceInfo) - 344 ms
TEST(ServiceNameTests, readService) - 366 ms
TEST(ServiceNameTests, checkFields) - 405 ms
TEST(ServiceNameTests, checkInvalidServiceNames) - 33 ms
TEST(ServiceNameTests, checkValidServiceNames) - 112 ms
TEST(ServiceFrameworkTests, serviceProviderChain) - 100 ms
TEST(ServiceFrameworkTests, serviceWithOps) - 84 ms
TEST(ServiceFrameworkTests, serviceWithNoOps) - 125 ms
TEST(RpcStatusProtocolChecks, checkProtobufRpcStatusCodes) - 100 ms
TEST(ConfigRamstoreTests, checkMultipleConfig) - 0 ms
TEST(ConfigRamstoreTests, checkSingleConfig) - 59 ms
TEST(ConfigRamstoreTests, checkEmptyConfig) - 39 ms
TEST(EndianTests, le64) - 53 ms
TEST(EndianTests, le32) - 19 ms
TEST(EndianTests, le16) - 47 ms
TEST(EndianTests, le8) - 87 ms
TEST(TlvTests, encodeWrongOrder) - 49 ms
TEST(TlvTests, encodeInsufficientSpace) - 0 ms
TEST(TlvTests, encodeRecords) - 75 ms
TEST(TlvTests, decodeBadRecords) - 77 ms
TEST(TlvTests, findAndDecodeMissingOptional) - 39 ms
TEST(TlvTests, findAndDecode) - 0 ms
TEST(TlvTests, decodeGoodRecords) - 95 ms
TEST(UuidTests, parseValidUuidToReversed) - 85 ms
TEST(UuidTests, parseError) - 82 ms
TEST(UuidTests, parseUuidInUrn) - 48 ms
TEST(UuidTests, parseValidUuidMixedCase) - 100 ms
TEST(UuidTests, parseValidUuidLowerCase) - 87 ms
TEST(TsDemoTests, runTsDemo) - 2330889 ms
OK (129 tests, 129 ran, 18192 checks, 0 ignored, 0 filtered out, 60117219 ms)
# Run psa-its-api-test
```
./arm-linux/bin/psa-its-api-test
```
Results:
lines=8
***** PSA Architecture Test Suite - Version 1.4 *****
Running.. Storage Suite
******************************************
TEST: 401 | DESCRIPTION: UID not found check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Call get API for UID 6 which is not set
[Check 2] Call get_info API for UID 6 which is not set
[Check 3] Call remove API for UID 6 which is not set
[Check 4] Call get API for UID 6 which is removed
[Check 5] Call get_info API for UID 6 which is removed
[Check 6] Call remove API for UID 6 which is removed
Set storage for UID 6
[Check 7] Call get API for different UID 5
[Check 8] Call get_info API for different UID 5
[Check 9] Call remove API for different UID 5
TEST RESULT: PASSED
******************************************
TEST: 402 | DESCRIPTION: Write once error check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Update the flag of UID 1 with WRITE_ONCE flag
[Check 2] Try to remove the UID 1 having WRITE_ONCE flag
[Check 3] Create a new UID 2 with WRITE_ONCE flag
[Check 4] Try to remove the UID 2 having WRITE_ONCE flag
[Check 5] Try to change the length of write_once UID 2
[Check 6] Check UID removal still fails
[Check 7] Try to change the WRITE_ONCE flag to None for UID 2
[Check 8] Check UID removal still fails
TEST RESULT: PASSED
******************************************
TEST: 403 | DESCRIPTION: Insufficient space check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Overload storage space
UID 13 set failed due to insufficient space
Remove all registered UIDs
[Check 2] Overload storage again to verify all previous UID removed
UID 13 set failed due to insufficient space
Remove all registered UIDs
TEST RESULT: PASSED
******************************************
TEST: 404 | DESCRIPTION: Data Consistency check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Call set API with reduced length - TEST_BUFF_SIZE/2
[Check 2] Call get API with default length - TEST_BUFF_SIZE
TEST RESULT: PASSED
******************************************
TEST: 405 | DESCRIPTION: Success scenarios check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Set UID with data length zero and call storage APIs
[Check 2] Resetting the length check
TEST RESULT: PASSED
******************************************
TEST: 406 | DESCRIPTION: Check for storage create flags | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Call set API with flag - PSA_STORAGE_FLAG_NONE
[Check 2] Call set API with flag - PSA_STORAGE_FLAG_NO_CONFIDENTIALITY
[Check 3] Call set API with flag - PSA_STORAGE_FLAG_NO_REPLAY_PROTECTION
TEST RESULT: PASSED
******************************************
TEST: 407 | DESCRIPTION: Incorrect Size check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
Create a valid Storage - TEST_BUFF_SIZE/2
Increase the length of storage - TEST_BUFF_SIZE
[Check 1] Call get API with old length - TEST_BUFF_SIZE/2
[Check 2] Call get API with old length - TEST_BUFF_SIZE/4
Decrease the length of storage - TEST_BUFF_SIZE/4
[Check 3] Call get API with old length - TEST_BUFF_SIZE/2
[Check 4] Call get API with old length - TEST_BUFF_SIZE
[Check 5] Call get API with valid length - TEST_BUFF_SIZE/4
TEST RESULT: PASSED
******************************************
TEST: 408 | DESCRIPTION: Invalid offset check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Try to access data with varying valid offset
[Check 2] Try to access data with varying invalid offset
TEST RESULT: PASSED
******************************************
TEST: 409 | DESCRIPTION: Invalid Arguments check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Call set API with NULL pointer and data length 0
[Check 2] Call get API with NULL read buffer and data length 0
[Check 3] Remove the UID
[Check 4] Call get_info API to verify UID removed
[Check 5] Create UID with zero data_len and valid write buffer
[Check 8] Call get API with NULL read buffer and data length 0
[Check 9] Increase the length
TEST RESULT: PASSED
******************************************
TEST: 410 | DESCRIPTION: UID value zero check | UT: ITS
[Info] Executing tests from non-secure
[Info] Executing ITS tests
[Check 1] Creating storage with UID 0 should fail
[Check 2] Get_info for UID 0 should fail
[Check 3] Removing storage with UID 0 should fail
TEST RESULT: PASSED
******************************************
************ Storage Suite Report **********
TOTAL TESTS : 10
TOTAL PASSED : 10
TOTAL SIM ERROR : 0
TOTAL FAILED : 0
TOTAL SKIPPED : 0
******************************************
Entering standby..
# Run psa-ps-api-test
```
./arm-linux/bin/psa-ps-api-test
```
Result:
lines=8
***** PSA Architecture Test Suite - Version 1.4 *****
Running.. Storage Suite
******************************************
TEST: 401 | DESCRIPTION: UID not found check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Call get API for UID 6 which is not set
[Check 2] Call get_info API for UID 6 which is not set
[Check 3] Call remove API for UID 6 which is not set
[Check 4] Call get API for UID 6 which is removed
[Check 5] Call get_info API for UID 6 which is removed
[Check 6] Call remove API for UID 6 which is removed
Set storage for UID 6
[Check 7] Call get API for different UID 5
[Check 8] Call get_info API for different UID 5
[Check 9] Call remove API for different UID 5
TEST RESULT: PASSED
******************************************
TEST: 402 | DESCRIPTION: Write once error check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Update the flag of UID 1 with WRITE_ONCE flag
[Check 2] Try to remove the UID 1 having WRITE_ONCE flag
[Check 3] Create a new UID 2 with WRITE_ONCE flag
[Check 4] Try to remove the UID 2 having WRITE_ONCE flag
[Check 5] Try to change the length of write_once UID 2
[Check 6] Check UID removal still fails
[Check 7] Try to change the WRITE_ONCE flag to None for UID 2
[Check 8] Check UID removal still fails
TEST RESULT: PASSED
******************************************
TEST: 403 | DESCRIPTION: Insufficient space check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Overload storage space
UID 11 set failed due to insufficient space
Remove all registered UIDs
[Check 2] Overload storage again to verify all previous UID removed
UID 11 set failed due to insufficient space
Remove all registered UIDs
TEST RESULT: PASSED
******************************************
TEST: 404 | DESCRIPTION: Data Consistency check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Call set API with reduced length - TEST_BUFF_SIZE/2
[Check 2] Call get API with default length - TEST_BUFF_SIZE
TEST RESULT: PASSED
******************************************
TEST: 405 | DESCRIPTION: Success scenarios check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Set UID with data length zero and call storage APIs
[Check 2] Resetting the length check
TEST RESULT: PASSED
******************************************
TEST: 406 | DESCRIPTION: Check for storage create flags | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Call set API with flag - PSA_STORAGE_FLAG_NONE
[Check 2] Call set API with flag - PSA_STORAGE_FLAG_NO_CONFIDENTIALITY
[Check 3] Call set API with flag - PSA_STORAGE_FLAG_NO_REPLAY_PROTECTION
TEST RESULT: PASSED
******************************************
TEST: 407 | DESCRIPTION: Incorrect Size check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
Create a valid Storage - TEST_BUFF_SIZE/2
Increase the length of storage - TEST_BUFF_SIZE
[Check 1] Call get API with old length - TEST_BUFF_SIZE/2
[Check 2] Call get API with old length - TEST_BUFF_SIZE/4
Decrease the length of storage - TEST_BUFF_SIZE/4
[Check 3] Call get API with old length - TEST_BUFF_SIZE/2
[Check 4] Call get API with old length - TEST_BUFF_SIZE
[Check 5] Call get API with valid length - TEST_BUFF_SIZE/4
TEST RESULT: PASSED
******************************************
TEST: 408 | DESCRIPTION: Invalid offset check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Try to access data with varying valid offset
[Check 2] Try to access data with varying invalid offset
TEST RESULT: PASSED
******************************************
TEST: 409 | DESCRIPTION: Invalid Arguments check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Call set API with NULL pointer and data length 0
[Check 2] Call get API with NULL read buffer and data length 0
[Check 3] Remove the UID
[Check 4] Call get_info API to verify UID removed
[Check 5] Create UID with zero data_len and valid write buffer
[Check 8] Call get API with NULL read buffer and data length 0
[Check 9] Increase the length
TEST RESULT: PASSED
******************************************
TEST: 410 | DESCRIPTION: UID value zero check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
[Check 1] Creating storage with UID 0 should fail
[Check 2] Get_info for UID 0 should fail
[Check 3] Removing storage with UID 0 should fail
TEST RESULT: PASSED
******************************************
TEST: 411 | DESCRIPTION: Optional APIs: UID not found check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
Test Case skipped as Optional PS APIs are not supported.
TEST RESULT: SKIPPED (Skip Code=0x2b)
******************************************
TEST: 412 | DESCRIPTION: Optional APIs: Invalid arguments and offset invalid | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
Test Case skipped as Optional PS APIs are not supported.
TEST RESULT: SKIPPED (Skip Code=0x2b)
******************************************
TEST: 413 | DESCRIPTION: Set_Extended and Create api : Success | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
Test Case skipped as Optional PS APIs are not supported.
TEST RESULT: SKIPPED (Skip Code=0x2b)
******************************************
TEST: 414 | DESCRIPTION: Optional APIs not supported check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
Optional PS APIs are not supported.
[Check 1] Call to create API should fail as API not supported
Failed at Checkpoint: 1
Actual: 0
Expected: -134
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 415 | DESCRIPTION: Create API write_once flag value check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
Test Case skipped as Optional PS APIs are not supported.
TEST RESULT: SKIPPED (Skip Code=0x2b)
******************************************
TEST: 416 | DESCRIPTION: Storage assest capacity modification check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
Test Case skipped as Optional PS APIs not are supported.
TEST RESULT: SKIPPED (Skip Code=0x2b)
******************************************
TEST: 417 | DESCRIPTION: Storage assest capacity modification check | UT: PS
[Info] Executing tests from non-secure
[Info] Executing PS tests
Test Case skipped as Optional PS APIs not are supported.
TEST RESULT: SKIPPED (Skip Code=0x2b)
******************************************
************ Storage Suite Report **********
TOTAL TESTS : 17
TOTAL PASSED : 10
TOTAL SIM ERROR : 0
TOTAL FAILED : 1
TOTAL SKIPPED : 6
******************************************
Entering standby..
# Run psa-crypto-api-test:
```
./arm-linux/bin/psa-crypto-api-test
```
Result:
```
lines=8
***** PSA Architecture Test Suite - Version 1.4 *****
Running.. Crypto Suite
******************************************
TEST: 201 | DESCRIPTION: Testing crypto key management APIs | UT: psa_crypto_init
[Info] Executing tests from non-secure
[Check 1] Test calling crypto functions before psa_crypto_init
[Check 2] Test psa_crypto_init
[Check 3] Test multiple psa_crypto_init
TEST RESULT: PASSED
******************************************
TEST: 202 | DESCRIPTION: Testing crypto key management APIs | UT: psa_import_key
[Info] Executing tests from non-secure
[Check 1] Test psa_import_key 16 bytes AES
[Check 2] Test psa_import_key 24 bytes AES
[Check 3] Test psa_import_key 32 bytes AES
[Check 4] Test psa_import_key 2048 RSA public key
[Check 5] Test psa_import_key with RSA 2048 keypair
[Check 6] Test psa_import_key with DES 8 bytes key
[Check 7] Test psa_import_key with Triple DES 2-Key
[Check 8] Test psa_import_key with Triple DES 3-Key
[Check 9] Test psa_import_key with EC Public key
[Check 10] Test psa_import_key with EC keypair
[Check 11] Test psa_import_key 16 bytes AES with invalid bits
[Check 12] Test psa_import_key with key data greater than the algorithm size
[Check 13] Test psa_import_key with incorrect key data size
[Check 14] Test psa_import_key with invalid key type value
TEST RESULT: PASSED
******************************************
TEST: 203 | DESCRIPTION: Testing crypto key management APIs | UT: psa_export_key
[Info] Executing tests from non-secure
[Check 1] Test psa_export_key 16 Byte AES
[Check 2] Test psa_export_key 24 Byte AES
[Check 3] Test psa_export_key 32 Byte AES
[Check 4] Test psa_export_key 2048 RSA public key
[Check 5] Test psa_export_key with RSA 2048 keypair
[Check 6] Test psa_export_key with DES 64 bit key
[Check 7] Test psa_export_key with Triple DES 2-Key
[Check 8] Test psa_export_key with Triple DES 3-Key
[Check 9] Test psa_export_key with EC Public key
[Check 10] Test psa_export_key with EC keypair
[Check 11] Test psa_export_key with key policy verify
[Check 12] Test psa_export_key with less buffer size
TEST RESULT: PASSED
******************************************
TEST: 204 | DESCRIPTION: Testing crypto key management APIs | UT: psa_export_public_key
[Info] Executing tests from non-secure
[Check 1] Test psa_export_public_key 16 Byte AES
[Check 2] Test psa_export_public_key 24 Byte AES
[Check 3] Test psa_export_public_key 32 Byte AES
[Check 4] Test psa_export_public_key 2048 RSA public key
[Check 5] Test psa_export_public_key with RSA 2048 keypair
[Check 6] Test psa_export_public_key with DES 64 bit key
[Check 7] Test psa_export_public_key with Triple DES 2-Key
[Check 8] Test psa_export_public_key with Triple DES 3-Key
[Check 9] Test psa_export_public_key with EC Public key
[Check 10] Test psa_export_public_key with EC keypair
[Check 11] Test psa_export_public_key with less buffer size
TEST RESULT: PASSED
******************************************
TEST: 205 | DESCRIPTION: Testing crypto key management APIs | UT: psa_destroy_key
[Info] Executing tests from non-secure
[Check 1] Test psa_destroy_key 16 Byte AES
[Check 2] Test psa_destroy_key 24 Byte AES
[Check 3] Test psa_destroy_key 32 Byte AES
[Check 4] Test psa_destroy_key 2048 RSA public key
[Check 5] Test psa_destroy_key with RSA 2048 keypair
[Check 6] Test psa_destroy_key with DES 64 bit key
[Check 7] Test psa_destroy_key with Triple DES 2-Key
[Check 8] Test psa_destroy_key with Triple DES 3-Key
[Check 9] Test psa_destroy_key with EC Public key
[Check 10] Test psa_destroy_key with EC keypair
TEST RESULT: PASSED
******************************************
TEST: 206 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_compute
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_compute with MD5 algorithm
[Check 2] Test psa_hash_compute with RIPEMD160 algorithm
[Check 3] Test psa_hash_compute with SHA1 algorithm
[Check 4] Test psa_hash_compute with SHA224 algorithm
[Check 5] Test psa_hash_compute with SHA256 algorithm
[Check 6] Test psa_hash_compute with SHA384 algorithm
[Check 7] Test psa_hash_compute with SHA512 algorithm
[Check 8] Test psa_hash_compute with small buffer size
[Check 9] Test psa_hash_compute with invalid algorithm
TEST RESULT: PASSED
******************************************
TEST: 207 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_compare
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_compare with MD5 algorithm
[Check 2] Test psa_hash_compare with RIPEMD160 algorithm
[Check 3] Test psa_hash_compare with SHA1 algorithm
[Check 4] Test psa_hash_compare with SHA224 algorithm
[Check 5] Test psa_hash_compare with SHA256 algorithm
[Check 6] Test psa_hash_compare with SHA384 algorithm
[Check 7] Test psa_hash_compare with SHA512 algorithm
[Check 8] Test psa_hash_compare with incorrect hash
[Check 9] Test psa_hash_compare with incorrect hash length
[Check 10] Test psa_hash_compare with invalid algorithm
TEST RESULT: PASSED
******************************************
TEST: 208 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_key_derivation_setup
[Info] Executing tests from non-secure
[Check 1] Test psa_key_derivation_setup - ECDH + HKDF-SHA-256
[Check 2] Test psa_key_derivation_setup - ECDH, unknown KDF
[Check 3] Test psa_key_derivation_setup - bad key derivation algorithm
[Check 4] Test psa_key_derivation_setup - Invalid Algorithm
TEST RESULT: PASSED
******************************************
TEST: 209 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_key_derivation_input_bytes
[Info] Executing tests from non-secure
[Check 1] Test psa_key_derivation_input_bytes - Step as Info
[Check 2] Test psa_key_derivation_input_bytes - Step as secret
[Check 3] Test psa_key_derivation_input_bytes - Step as salt
[Check 4] Test psa_key_derivation_input_bytes - Step as label
[Check 5] Test psa_key_derivation_input_bytes - Step as seed
[Check 6] Test psa_key_derivation_input_bytes - Invalid step
TEST RESULT: PASSED
******************************************
TEST: 210 | DESCRIPTION: Testing crypto key attributes APIs | UT: psa_key_attributes_set_get
[Info] Executing tests from non-secure
[Check 1] Test psa_key_attributes_set_get key attributes
TEST RESULT: PASSED
******************************************
TEST: 211 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_setup
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_setup with MD5 algorithm
Failed at Checkpoint: 4
Actual: 0
Expected: -137
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 212 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_update
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_update with MD5 algorithm
[Check 2] Test psa_hash_update with RIPEMD160 algorithm
[Check 3] Test psa_hash_update with SHA1 algorithm
[Check 4] Test psa_hash_update with SHA224 algorithm
[Check 5] Test psa_hash_update with SHA256 algorithm
[Check 6] Test psa_hash_update with SHA384 algorithm
[Check 7] Test psa_hash_update with SHA512 algorithm
[Check 8] Test psa_hash_update without hash setup
[Check 9] Test psa_hash_update with completed opertaion handle
TEST RESULT: PASSED
******************************************
TEST: 213 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_verify
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_verify with MD5 algorithm
[Check 2] Test psa_hash_verify with RIPEMD160 algorithm
[Check 3] Test psa_hash_verify with SHA1 algorithm
[Check 4] Test psa_hash_verify with SHA224 algorithm
[Check 5] Test psa_hash_verify with SHA256 algorithm
[Check 6] Test psa_hash_verify with SHA384 algorithm
[Check 7] Test psa_hash_verify with SHA512 algorithm
[Check 8] Test psa_hash_verify with incorrect expected hash
[Check 9] Test psa_hash_verify with incorrect hash length
[Check 10] test psa_hash_verify with inactive & invalid operation handle
TEST RESULT: PASSED
******************************************
TEST: 214 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_finish
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_finish with MD5 algorithm
[Check 2] Test psa_hash_finish with RIPEMD160 algorithm
[Check 3] Test psa_hash_finish with SHA1 algorithm
[Check 4] Test psa_hash_finish with SHA224 algorithm
[Check 5] Test psa_hash_finish with SHA256 algorithm
[Check 6] Test psa_hash_finish with SHA384 algorithm
[Check 7] Test psa_hash_finish with SHA512 algorithm
[Check 8] Test psa_hash_finish with invalid hash buffer size
[Check 9] test psa_hash_finish with inactive operation handle
TEST RESULT: PASSED
******************************************
TEST: 215 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_abort
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_abort with MD5 algorithm
[Check 2] Test psa_hash_abort with RIPEMD160 algorithm
[Check 3] Test psa_hash_abort with SHA1 algorithm
[Check 4] Test psa_hash_abort with SHA224 algorithm
[Check 5] Test psa_hash_abort with SHA256 algorithm
[Check 6] Test psa_hash_abort with SHA384 algorithm
[Check 7] Test psa_hash_abort with SHA512 algorithm
[Check 8] Test psa_hash_finish after calling psa_hash_abort
TEST RESULT: PASSED
******************************************
TEST: 216 | DESCRIPTION: Testing crypto generator functions APIs | UT: psa_generate_key
[Info] Executing tests from non-secure
[Check 1] Test psa_generate_key 16 Byte AES
[Check 2] Test psa_generate_key 24 Byte AES
[Check 3] Test psa_generate_key 32 Byte AES
[Check 4] Test psa_generate_key with DES 64 bit key
[Check 5] Test psa_generate_key with Triple DES 2-Key
[Check 6] Test psa_generate_key with Triple DES 3-Key
[Check 7] Test psa_generate_key with RSA 2048 Keypair
[Check 8] Test psa_generate_key with ECC KeyPair
[Check 9] Test psa_generate_key with RSA 2048 Public key
Failed at Checkpoint: 3
Actual: -134
Expected: -135
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 217 | DESCRIPTION: Testing crypto generation APIs | UT: psa_generate_random
[Info] Executing tests from non-secure
[Check 1] Test psa_generate_random to get 0 Byte data
[Check 2] Test psa_generate_random to get 16 Byte data
[Check 3] Test psa_generate_random to get 24 Byte data
[Check 4] Test psa_generate_random to get 32 Byte data
[Check 5] Test psa_generate_random to get 64 Byte data
[Check 6] Test psa_generate_random to get 128 Byte data
[Check 7] Test psa_generate_random to get 256 Byte data
[Check 8] Test psa_generate_random to get 512 Byte data
[Check 9] Test psa_generate_random to get 1000 Byte data
TEST RESULT: PASSED
******************************************
TEST: 218 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_key_derivation_input_key
[Info] Executing tests from non-secure
[Check 1] Test psa_key_derivation_input_key 16 Byte Key
[Check 2] Test psa_key_derivation_input_key with invalid usage
[Check 3] Test psa_key_derivation_input_key with step as label
[Check 4] Test psa_key_derivation_input_key with step as info
[Check 5] Test psa_key_derivation_input_key with step as seed
[Check 6] Test psa_key_derivation_input_key with step as salt
[Check 7] Test psa_key_derivation_input_key with key type as AES(not derive)
[Check 8] Test psa_key_derivation_input_key incorrect key algorithm
[Check 9] Test psa_key_derivation_input_key with key type as 2048 RSA public key
[Check 10] Test psa_key_derivation_input_key with key type as RSA 2048 keypair
[Check 11] Test psa_key_derivation_input_key with zero as step
[Check 12] Test psa_cipher_decrypt_setup - Invalid key handle
[Check 13] Test psa_cipher_decrypt_setup - Zero as key handle
TEST RESULT: PASSED
******************************************
TEST: 219 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_key_derivation_key_agreement
[Info] Executing tests from non-secure
[Check 1] Test psa_key_derivation_key_agreement - ECDH SECP256R1
[Check 2] Test psa_key_derivation_key_agreement - Invalid step
[Check 3] Test psa_key_derivation_key_agreement - ECDH SECP384R1
[Check 4] Test psa_key_derivation_key_agreement - Invalid usage
[Check 5] Test psa_key_derivation_key_agreement - KDF not a key agreement alg
[Check 6] Test psa_key_derivation_key_agreement - Public key of different curve
[Check 7] Test psa_key_derivation_key_agreement - Pub key instead of Prv key
[Check 8] Test psa_key_derivation_key_agreement - Invalid handle
[Check 9] Test psa_key_derivation_key_agreement - Zero as handle
TEST RESULT: PASSED
******************************************
TEST: 220 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_key_derivation_output_bytes
[Info] Executing tests from non-secure
[Check 1] Test psa_key_derivation_output_bytes - HKDF
[Check 2] Test psa_key_derivation_output_bytes - optional salt
[Check 3] Test psa_key_derivation_output_bytes - capacity < output_length
[Check 4] Test psa_key_derivation_output_bytes - missing info
[Check 5] Test psa_key_derivation_output_bytes - missing salt/secret/info
[Check 6] Test psa_key_derivation_output_bytes - TLS12_PRF
[Check 7] Test psa_key_derivation_output_bytes - capacity < output_length
[Check 8] Test psa_key_derivation_output_bytes - missing seed/secret/label
TEST RESULT: PASSED
******************************************
TEST: 221 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_key_derivation_output_key
[Info] Executing tests from non-secure
[Check 1] Test psa_key_derivation_output_key - Key
[Check 2] Test psa_key_derivation_output_key - Info
[Check 3] Test psa_key_derivation_output_key - Salt
[Check 4] Test psa_key_derivation_output_key - Greater Capacity than available
[Check 5] Test psa_key_derivation_output_key - ECC Public key
[Check 6] Test psa_key_derivation_output_key - ECC keypair
[Check 7] Test psa_key_derivation_output_key - RSA Public Key[Check 8] Test psa_key_derivation_output_key - RSA keypair
[Check 9] Test psa_key_derivation_output_key - Invalid key size
TEST RESULT: PASSED
******************************************
TEST: 222 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_key_derivation_abort
[Info] Executing tests from non-secure
[Check 1] Test psa_key_derivation_abort
TEST RESULT: PASSED
******************************************
TEST: 223 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_key_derivation_set_get_capacity
[Info] Executing tests from non-secure
[Check 1] Test psa_key_derivation_set_get_capacity - < operation's capacity
[Check 2] Test psa_key_derivation_set_get_capacity - = operation's capacity
[Check 3] Test psa_key_derivation_set_get_capacity - > operation's capacity
[Check 4] Test psa_key_derivation_set_get_capacity - unchanged capacity
TEST RESULT: PASSED
******************************************
TEST: 224 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_encrypt
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_encrypt - CCM - AES - 13B nonce & 8B add data
Failed at Checkpoint: 4
Actual: -134
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 225 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_decrypt
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_decrypt - CCM - AES - 13B nonce & 8B add data
Failed at Checkpoint: 4
Actual: -134
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 226 | DESCRIPTION: Testing crypto MAC APIs | UT: psa_mac_sign_setup
[Info] Executing tests from non-secure
[Check 1] Test psa_mac_sign_setup - HMAC - SHA256
Failed at Checkpoint: 4
Actual: -133
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 227 | DESCRIPTION: Testing crypto MAC APIs | UT: psa_mac_update
[Info] Executing tests from non-secure
[Check 1] Test psa_mac_update - HMAC - SHA256 - 64 Byte
Failed at Checkpoint: 4
Actual: -133
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 228 | DESCRIPTION: Testing crypto MAC APIs | UT: psa_mac_sign_finish
[Info] Executing tests from non-secure
[Check 1] Test psa_mac_sign_finish - HMAC - SHA224
Failed at Checkpoint: 4
Actual: -133
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 229 | DESCRIPTION: Testing crypto MAC APIs | UT: psa_mac_verify_setup
[Info] Executing tests from non-secure
[Check 1] Test psa_mac_verify_setup - HMAC - SHA256
Failed at Checkpoint: 4
Actual: -133
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 230 | DESCRIPTION: Testing crypto MAC APIs | UT: psa_mac_verify_finish
[Info] Executing tests from non-secure
[Check 1] Test psa_mac_verify_finish - HMAC - SHA224
Failed at Checkpoint: 4
Actual: -133
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 231 | DESCRIPTION: Testing crypto MAC APIs | UT: psa_mac_abort
[Info] Executing tests from non-secure
[Check 1] Test psa_mac_abort - HMAC - SHA224
[Check 2] Test psa_mac_abort - HMAC - SHA224 - Truncated 8 Byte
[Check 3] Test psa_mac_abort - HMAC - SHA256
[Check 4] Test psa_mac_abort - HMAC - SHA512
[Check 5] Test psa_mac_abort - CMAC - AES
[Check 6] Test psa_mac_sign_finish after calling psa_mac_abort
TEST RESULT: PASSED
******************************************
TEST: 232 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_encrypt_setup
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_encrypt_setup 16 Byte AES
[Check 2] Test psa_cipher_encrypt_setup 24 Byte AES
[Check 3] Test psa_cipher_encrypt_setup 32 Byte AES
[Check 4] Test psa_cipher_encrypt_setup DES 64 bit key
[Check 5] Test psa_cipher_encrypt_setup Triple DES 2-Key
[Check 6] Test psa_cipher_encrypt_setup Triple DES 3-Key
[Check 7] Test psa_cipher_encrypt_setup 16 Byte raw data
[Check 8] Test psa_cipher_encrypt_setup - not a cipher algorithm
[Check 9] Test psa_cipher_encrypt_setup - unknown cipher algorithm
[Check 10] Test psa_cipher_encrypt_setup - incompatible key ARC4
Failed at Checkpoint: 3
Actual: -134
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 233 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_decrypt_setup
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_decrypt_setup 16 Byte AES
[Check 2] Test psa_cipher_decrypt_setup 24 Byte AES
[Check 3] Test psa_cipher_decrypt_setup 32 Byte AES
[Check 4] Test psa_cipher_decrypt_setup DES 64 bit key
[Check 5] Test psa_cipher_decrypt_setup Triple DES 2-Key
[Check 6] Test psa_cipher_decrypt_setup Triple DES 3-Key
[Check 7] Test psa_cipher_decrypt_setup 16 Byte raw data
[Check 8] Test psa_cipher_decrypt_setup - not a cipher algorithm
[Check 9] Test psa_cipher_decrypt_setup - unknown cipher algorithm
[Check 10] Test psa_cipher_decrypt_setup - incompatible key ARC4
Failed at Checkpoint: 3
Actual: -134
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 234 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_generate_iv
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_generate_iv 16 Byte AES
[Check 2] Test psa_cipher_generate_iv 24 Byte AES
[Check 3] Test psa_cipher_generate_iv 32 Byte AES
[Check 4] Test psa_cipher_generate_iv DES 64 bit key
[Check 5] Test psa_cipher_generate_iv DES 2-Key
[Check 6] Test psa_cipher_generate_iv DES 3-Key
[Check 7] Test psa_cipher_generate_iv AES - small iv buffer
[Check 8] Test psa_cipher_generate_iv DES - small iv buffer
TEST RESULT: PASSED
******************************************
TEST: 235 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_set_iv
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_set_iv 16 Byte AES
[Check 2] Test psa_cipher_set_iv 24 Byte AES
[Check 3] Test psa_cipher_set_iv 32 Byte AES
[Check 4] Test psa_cipher_set_iv DES 64 bit key
[Check 5] Test psa_cipher_set_iv DES 2-Key
[Check 6] Test psa_cipher_set_iv DES 3-Key
[Check 7] Test psa_cipher_set_iv AES - small iv buffer
[Check 8] Test psa_cipher_set_iv DES - small iv buffer
[Check 9] Test psa_cipher_set_iv AES - large iv buffer
[Check 10] Test psa_cipher_set_iv DES - large iv buffer
TEST RESULT: PASSED
******************************************
TEST: 236 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_update
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_update - Encrypt - AES CBC_NO_PADDING
[Check 2] Test psa_cipher_update - Encrypt - AES CBC_NO_PADDING (Short in)
[Check 3] Test psa_cipher_update - Encrypt - AES CBC_PKCS7
[Check 4] Test psa_cipher_update - Encrypt - AES CBC_PKCS7 (Short input)
[Check 5] Test psa_cipher_update - Encrypt - AES CTR
[Check 6] Test psa_cipher_update - Encrypt - DES CBC (nopad)
[Check 7] Test psa_cipher_update - Encrypt - 2-key 3DE -CBC (nopad)
[Check 8] Test psa_cipher_update - Encrypt - 3-key 3DE -CBC (nopad)
[Check 9] Test psa_cipher_update - Encrypt - small output buffer size
[Check 10] Test psa_cipher_update - Decrypt - AES CBC_NO_PADDING
[Check 11] Test psa_cipher_update - Decrypt - AES CBC_NO_PADDING (Short in)
[Check 12] Test psa_cipher_update - Decrypt - AES CBC_PKCS7
[Check 13] Test psa_cipher_update - Decrypt - AES CBC_PKCS7 (Short input)
[Check 14] Test psa_cipher_update - Decrypt - AES CTR
[Check 15] Test psa_cipher_update - Decrypt - DES CBC (nopad)
[Check 16] Test psa_cipher_update - Decrypt - 2-key 3DE -CBC (nopad)
[Check 17] Test psa_cipher_update - Decrypt - 3-key 3DE -CBC (nopad)
[Check 18] Test psa_cipher_update - Decrypt - small output buffer size
[Check 19] Test psa_cipher_update without cipher setup
TEST RESULT: PASSED
******************************************
TEST: 237 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_finish
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_finish - Encrypt - AES CBC_NO_PADDING
[Check 2] Test psa_cipher_finish - Encrypt - AES CBC_NO_PADDING (Short in)
[Check 3] Test psa_cipher_finish - Encrypt - AES CBC_PKCS7
[Check 4] Test psa_cipher_finish - Encrypt - AES CBC_PKCS7 (Short input)
[Check 5] Test psa_cipher_finish - Encrypt - AES CTR
[Check 6] Test psa_cipher_finish - Encrypt - AES CTR (short input)
[Check 7] Test psa_cipher_finish - Encrypt - DES CBC (nopad)
[Check 8] Test psa_cipher_finish - Encrypt - 2-key 3DE -CBC (nopad)
[Check 9] Test psa_cipher_finish - Encrypt - 3-key 3DE -CBC (nopad)
[Check 10] Test psa_cipher_finish - Encrypt - small output buffer size
[Check 11] Test psa_cipher_finish - Decrypt - AES CBC_NO_PADDING
[Check 12] Test psa_cipher_finish - Decrypt - AES CBC_NO_PADDING (Short in)
[Check 13] Test psa_cipher_update - Decrypt - AES CBC_PKCS7
[Check 14] Test psa_cipher_finish - Decrypt - AES CBC_PKCS7 (Short input)
[Check 15] Test psa_cipher_finish - Decrypt - AES CTR
[Check 16] Test psa_cipher_finish - Decrypt - AES CTR (short input)
[Check 17] Test psa_cipher_finish - Decrypt - DES CBC (nopad)
[Check 18] Test psa_cipher_finish - Decrypt - 2-key 3DE -CBC (nopad)
[Check 19] Test psa_cipher_finish - Decrypt - 3-key 3DE -CBC (nopad)
TEST RESULT: PASSED
******************************************
TEST: 238 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_abort
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_abort - Encrypt - AES CBC_NO_PADDING
[Check 2] Test psa_cipher_abort - Encrypt - AES CBC_PKCS7
[Check 3] Test psa_cipher_abort - Encrypt - AES CTR
[Check 4] Test psa_cipher_abort - Encrypt - DES CBC (nopad)
[Check 5] Test psa_cipher_abort - Encrypt - 2-key 3DE -CBC (nopad)
[Check 6] Test psa_cipher_abort - Encrypt - 3-key 3DE -CBC (nopad)
[Check 7] Test psa_cipher_abort - Decrypt - AES CBC_NO_PADDING
[Check 8] Test psa_cipher_abort - Decrypt - AES CBC_PKCS7
[Check 9] Test psa_cipher_abort - Decrypt - AES CTR
[Check 10] Test psa_cipher_abort - Decrypt - DES CBC (nopad)
[Check 11] Test psa_cipher_abort - Decrypt - 2-key 3DE -CBC (nopad)
[Check 12] Test psa_cipher_abort - Decrypt - 3-key 3DE -CBC (nopad)
[Check 13] Test psa_cipher_update after psa_cipher_abort should fail
TEST RESULT: PASSED
******************************************
TEST: 239 | DESCRIPTION: Testing crypto asymmetric APIs | UT: psa_asymmetric_encrypt
[Info] Executing tests from non-secure
[Check 1] Test psa_asymmetric_encrypt - RSA PKCS1V15
[Check 2] Test psa_asymmetric_encrypt - RSA KEY_PAIR PKCS1V15
[Check 3] Test psa_asymmetric_encrypt - RSA OAEP SHA256
[Check 4] Test psa_asymmetric_encrypt - RSA OAEP SHA256 with label
[Check 5] Test psa_asymmetric_encrypt - RSA KEY_PAIR OAEP SHA256
[Check 6] Test psa_asymmetric_encrypt - RSA KEY_PAIR OAEP SHA256 with label
[Check 7] Test psa_asymmetric_encrypt - Small output buffer
[Check 8] Test psa_asymmetric_encrypt - Invalid algorithm
[Check 9] Test psa_asymmetric_encrypt - Invalid key type
[Check 10] Test psa_asymmetric_encrypt - Invalid usage
[Check 11] Test psa_asymmetric_encrypt - RSA PKCS1V15 - Salt
[Check 12] Test psa_asymmetric_encrypt - ECC public key
[Check 13] Test psa_asymmetric_encrypt - Invalid key handle
[Check 14] Test psa_asymmetric_encrypt - Zero as key handle
TEST RESULT: PASSED
******************************************
TEST: 240 | DESCRIPTION: Testing crypto asymmetric APIs | UT: psa_asymmetric_decrypt
[Info] Executing tests from non-secure
[Check 1] Test psa_asymmetric_decrypt - RSA KEY_PAIR PKCS1V15
[Check 2] Test psa_asymmetric_decrypt - RSA KEY_PAIR OAEP SHA256
[Check 3] Test psa_asymmetric_decrypt - RSA KEY_PAIR OAEP SHA256 with label
[Check 4] Test psa_asymmetric_decrypt - Invalid key type (RSA public key)
[Check 5] Test psa_asymmetric_decrypt - Small output buffer
[Check 6] Test psa_asymmetric_decrypt - Invalid algorithm
[Check 7] Test psa_asymmetric_decrypt - Invalid key type (AES Key)
[Check 8] Test psa_asymmetric_decrypt - Invalid usage
[Check 9] Test psa_asymmetric_decrypt - RSA PKCS1V15 - Salt
[Check 10] Test psa_asymmetric_decrypt - Invalid key handle
[Check 11] Test psa_asymmetric_decrypt - Zero as key handle
TEST RESULT: PASSED
******************************************
TEST: 241 | DESCRIPTION: Testing crypto asymmetric APIs | UT: psa_sign_hash
[Info] Executing tests from non-secure
[Check 1] Test psa_sign_hash - RSA KEY_PAIR PKCS1V15 RAW
[Check 2] Test psa_sign_hash - RSA KEY_PAIR PKCS1V15 SHA-256
[Check 3] Test psa_sign_hash - ECDSA SECP256R1 SHA-256
[Check 4] Test psa_sign_hash - Invalid key type (RSA public key)
[Check 5] Test psa_sign_hash - Small output buffer
[Check 6] Test psa_sign_hash - Invalid algorithm
[Check 7] Test psa_sign_hash - Invalid key type (AES Key)
[Check 8] Test psa_sign_hash - Invalid usage
[Check 9] Test psa_sign_hash - Wrong hash size
[Check 10] Test psa_sign_hash - Invalid key handle
[Check 11] Test psa_sign_hash - Zero as key handle
TEST RESULT: PASSED
******************************************
TEST: 242 | DESCRIPTION: Testing crypto asymmetric APIs | UT: psa_verify_hash
[Info] Executing tests from non-secure
[Check 1] Test psa_verify_hash - RSA KEY_PAIR PKCS1V15 RAW
[Check 2] Test psa_verify_hash - RSA KEY_PAIR PKCS1V15 SHA-256
[Check 3] Test psa_verify_hash - ECDSA KEY_PAIR SECP256R1 SHA-256
[Check 4] Test psa_verify_hash - EC public key
[Check 5] Test psa_verify_hash - RSA public key
[Check 6] Test psa_verify_hash - Small output buffer
[Check 7] Test psa_verify_hash - Invalid algorithm
[Check 8] Test psa_verify_hash - Invalid key type (AES Key)
[Check 9] Test psa_verify_hash - Invalid usage
[Check 10] Test psa_verify_hash - Wrong hash size
[Check 11] Test psa_verify_hash - Wrong signature
[Check 12] Test psa_verify_hash - Wrong signature size
[Check 13] Test psa_verify_hash - Invalid key handle
[Check 14] Test psa_verify_hash - Zero as key handle
TEST RESULT: PASSED
******************************************
TEST: 243 | DESCRIPTION: Testing crypto key derivation APIs | UT: psa_raw_key_agreement
[Info] Executing tests from non-secure
[Check 1] Test psa_raw_key_agreement - ECDH SECP256R1
[Check 2] Test psa_raw_key_agreement - Small buffer size
[Check 3] Test psa_raw_key_agreement - ECDH SECP384R1
[Check 4] Test psa_raw_key_agreement - Invalid usage
[Check 5] Test psa_raw_key_agreement - Unknown KDF
[Check 6] Test psa_raw_key_agreement - Not a key agreement alg
[Check 7] Test psa_raw_key_agreement - Public key on different curve
[Check 8] Test psa_raw_key_agreement - Public key instead of private key
[Check 9] Test psa_raw_key_agreement - Invalid key handle
[Check 10] Test psa_raw_key_agreement - Zero as key handle
TEST RESULT: PASSED
******************************************
TEST: 244 | DESCRIPTION: Testing crypto key management APIs | UT: psa_copy_key
[Info] Executing tests from non-secure
[Check 1] Test psa_copy_key - 2048 RSA public key
[Check 2] Test psa_copy_key - RSA 2048 keypair
[Check 3] Test psa_copy_key - Incompatible target policy(source and target)
[Check 4] Test psa_copy_key - source key with no export usage
[Check 5] Test psa_copy_key - DES 64 bit key
[Check 6] Test psa_copy_key - Triple DES 2-Key
[Check 7] Test psa_copy_key - Triple DES 3-Key
[Check 8] Test psa_copy_key - EC Public key
[Check 9] Test psa_copy_key - EC keypair
TEST RESULT: PASSED
******************************************
TEST: 245 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_clone
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_clone - MD5 algorithm
[Check 2] Test psa_hash_clone - RIPEMD160 algorithm
[Check 3] Test psa_hash_clone - SHA1 algorithm
[Check 4] Test psa_hash_clone - SHA224 algorithm
[Check 5] Test psa_hash_clone - SHA256 algorithm
[Check 6] Test psa_hash_clone - SHA384 algorithm
[Check 7] Test psa_hash_clone - SHA512 algorithm
[Check 8] Test psa_hash_clone - from an inactive source operation
[Check 9] Test psa_hash_clone - on an active target operation
Failed at Checkpoint: 5
Actual: 0
Expected: -137
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 246 | DESCRIPTION: Testing crypto MAC APIs | UT: psa_mac_compute
[Info] Executing tests from non-secure
[Check 1] Test psa_mac_compute HMAC SHA 224
[Check 2] Test psa_mac_compute - Incompactible HMAC for CMAC
[Check 3] Test psa_mac_compute - Invalid usage
[Check 4] Test psa_mac_compute - truncated MAC too small
[Check 5] Test psa_mac_compute - truncated MAC too large
[Check 6] Test psa_mac_compute - bad algorithm (unknown MAC algorithm)
[Check 7] Test psa_mac_compute HMAC SHA 256
[Check 8] Test psa_mac_compute HMAC SHA 512
[Check 9] Test psa_mac_compute HMAC SHA 224 (truncated to 8 Byte)
[Check 10] Test psa_mac_compute CMAC AES 128
[Check 11] Test psa_mac_compute small size buffer
[Check 12] Test psa_mac_compute - Invalid key type
TEST RESULT: PASSED
******************************************
TEST: 247 | DESCRIPTION: Testing crypto MAC APIs | UT: psa_mac_verify
[Info] Executing tests from non-secure
[Check 1] Test psa_mac_verify HMAC SHA 224
Failed at Checkpoint: 4
Actual: -133
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 248 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_encrypt
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_encrypt - Encrypt - AES CBC_NO_PADDING
Failed at Checkpoint: 4
Actual: -137
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 249 | DESCRIPTION: Testing crypto symmetric cipher APIs | UT: psa_cipher_decrypt
[Info] Executing tests from non-secure
[Check 1] Test psa_cipher_decrypt - Encrypt - AES CBC_NO_PADDING
[Check 2] Test psa_cipher_decrypt - Decrypt - AES CBC_NO_PADDING
Failed at Checkpoint: 4
Actual: -137
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 250 | DESCRIPTION: Testing crypto key management APIs | UT: psa_sign_message
[Info] Executing tests from non-secure
[Check 1] Test psa_sign_message - RSA KEY_PAIR PKCS1V15 RAW
[Check 2] Test psa_sign_message - ECDSA SECP256R1 SHA-256
Failed at Checkpoint: 4
Actual: -133
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 251 | DESCRIPTION: Testing crypto key management APIs | UT: psa_verify_message
[Info] Executing tests from non-secure
[Check 1] Test psa_verify_message - RSA KEY_PAIR PKCS1V15 RAW
[Check 2] Test psa_verify_message - RSA Public Key PKCS1V15 RAW
[Check 3] Test psa_verify_message - RSA KEY_PAIR PKCS1V15 SHA-256
Failed at Checkpoint: 4
Actual: -133
Expected: -149
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 252 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_encrypt_setup
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_encrypt_setup - CCM - AES
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 253 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_decrypt_setup
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_decrypt_setup - CCM - AES
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 254 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_generate_nonce
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_generate_nonce - Encrypt - CCM
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 255 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_set_nonce
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_set_nonce - Encrypt - CCM
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 256 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_set_lengths
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_set_lengths - Encrypt - CCM
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 257 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_update_ad
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_update_ad - Encrypt - CCM
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 258 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_update
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_update - Encrypt - CCM
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 259 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_finish
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_finish - AES-CCM
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 260 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_abort
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_abort - Encrypt - CCM - AES
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 261 | DESCRIPTION: Testing crypto AEAD APIs | UT: psa_aead_verify
[Info] Executing tests from non-secure
[Check 1] Test psa_aead_verify - AES-CCM
Failed at Checkpoint: 4
Actual: -132
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 262 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_suspend
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_suspend - MD5
Failed at Checkpoint: 5
Actual: -134
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
TEST: 263 | DESCRIPTION: Testing crypto hash functions APIs | UT: psa_hash_resume
[Info] Executing tests from non-secure
[Check 1] Test psa_hash_resume - MD5
Failed at Checkpoint: 5
Actual: -134
Expected: 0
TEST RESULT: FAILED (Error Code=0x1)
******************************************
************ Crypto Suite Report **********
TOTAL TESTS : 63
TOTAL PASSED : 34
TOTAL SIM ERROR : 0
TOTAL FAILED : 29
TOTAL SKIPPED : 0
******************************************
Entering standby..
```
Currently the attestation test fails due the lack of the attestation SP
support.