Change Details

The release has been tested with with OP-TEE manifest "master:2b88dac" with the following modifications: - Trusted Services version changed to ` v1.0.0_rc0` - Some fixes applied to OP-TEE/build. For details please see: https://github.com/OP-TEE/build/pull/683. At the time the test was executed changes were already accepted but not merged by maintainers - Version of all components: - optee/manifest: 2b88dac - buildroot: d48a8beb; tag: 2022.11.1 - edk2: dd4cae4d82 - edk2-platforms: 02daa58c21 - grub: e54c99a; grub-2.02 - linux: ca87e77a2; tag: v6.1.34 - linux-arm-ffa-tee: a2d7349: arm-gitlab/tee-v2.0 - linux-arm-ffa-user: 18e3be7 tag: debugfs-v5.0.1 - mbedtls: dd79db100; tag: v2.28.1 (For TF-A) - optee_client: 8533e0e; tag: 3.22.0 - optee_examples: 5f1edb13c - optee_os: 5f1edb13c - optee_test: e1b6445 - trusted-firmware-a: 9881bb93a; tag: v2.8 - trusted-services: f188329: tag: v1.0.0_rc0 The above dependency configuration can be set using the attached local manifest file: {F418181} **Test configuration**: - The following test set-ups were used for validation: -- "host-test": execute all test on the X86 host running the test system. -- "optee-spmc-test": execute the "ffa_spmc" test groug of xtest. -- "psa-ts-embedded": in this configuration ITS and PS is using Block Storage as the storage backend. SPs use embedded packaging and default to raw-binary format. BLK, PS and ITS is using the elf format. In this configuration PSA and TS tests are executed. -- "psa-ts-fip": In this configuration SPs use "fip packaging" and the default binary format is "elf". BLK is using the raw-binary format. ITS and PS is using separate dedicated backends which store data to RAM buffers. In this configuration PSA and TS tests are executed. -- "smmgw:" This configuration uses "fip packaging" and the SP binary format is "elf". Only the "uefi-test" is executed. **Build options:** - psa-ts-embedded= MEASURED_BOOT=y:SPMC_TESTS=n:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=embedded:DEFAULT_SP_CONFIG=default-sp:SP_BLOCK_STORAGE_CONFIG=default-opteesp:SP_PSA_ITS_CONFIG=shared-flash-opteesp:SP_PSA_PS_CONFIG=shared-flash-opteesp - psa-ts-fip= MEASURED_BOOT=y:SPMC_TESTS=n:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=fip:DEFAULT_SP_CONFIG=default-opteesp:SP_BLOCK_STORAGE_CONFIG=default-sp:SP_PSA_CRYPTO_CONFIG=default-opteesp:SP_PSA_ATTESTATION_CONFIG=default-opteesp - smmgw= MEASURED_BOOT=n:SPMC_TESTS=n:TS_SMM_GATEWAY=y:TS_UEFI_TESTS=y:DEFAULT_SP_CONFIG=default-sp:SP_PACKAGING_METHOD=fip; - optee-spmc-test=MEASURED_BOOT=n:SPMC_TESTS=y:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=embedded:DEFAULT_SP_CONFIG=default-opteesp; **Test results** All tests passed with the following exceptions: - psa-ps-api-test: -- TEST: 414/Check 1/Checkpoint 1 fails.

The release has been tested with with OP-TEE manifest "master:2b88dac" with the following modifications: - Trusted Services version changed to ` v1.0.0_rc1` - Some fixes applied to OP-TEE/build. For details please see: https://github.com/OP-TEE/build/pull/683. At the time the test was executed changes were already accepted but not merged by maintainers - Version of all components: - optee/manifest: 2b88dac - buildroot: d48a8beb; tag: 2022.11.1 - edk2: dd4cae4d82 - edk2-platforms: 02daa58c21 - grub: e54c99a; grub-2.02 - linux: ca87e77a2; tag: v6.1.34 - linux-arm-ffa-tee: a2d7349: arm-gitlab/tee-v2.0 - linux-arm-ffa-user: 18e3be7 tag: debugfs-v5.0.1 - mbedtls: dd79db100; tag: v2.28.1 (For TF-A) - optee_client: 8533e0e; tag: 3.22.0 - optee_examples: 5f1edb13c - optee_os: 5f1edb13c - optee_test: e1b6445 - trusted-firmware-a: 9881bb93a; tag: v2.8 - trusted-services: b27d4163: tag: v1.0.0_rc1 The above dependency configuration can be set using the attached local manifest file: {F418182} **Test configuration**: - The following test set-ups were used for validation: -- "host-test": execute all test on the X86 host running the test system. -- "optee-spmc-test": execute the "ffa_spmc" test groug of xtest. -- "psa-ts-embedded": in this configuration ITS and PS is using Block Storage as the storage backend. SPs use embedded packaging and default to raw-binary format. BLK, PS and ITS is using the elf format. In this configuration PSA and TS tests are executed. -- "psa-ts-fip": In this configuration SPs use "fip packaging" and the default binary format is "elf". BLK is using the raw-binary format. ITS and PS is using separate dedicated backends which store data to RAM buffers. In this configuration PSA and TS tests are executed. -- "smmgw:" This configuration uses "fip packaging" and the SP binary format is "elf". Only the "uefi-test" is executed. **Build options:** - psa-ts-embedded= MEASURED_BOOT=y:SPMC_TESTS=n:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=embedded:DEFAULT_SP_CONFIG=default-sp:SP_BLOCK_STORAGE_CONFIG=default-opteesp:SP_PSA_ITS_CONFIG=shared-flash-opteesp:SP_PSA_PS_CONFIG=shared-flash-opteesp - psa-ts-fip= MEASURED_BOOT=y:SPMC_TESTS=n:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=fip:DEFAULT_SP_CONFIG=default-opteesp:SP_BLOCK_STORAGE_CONFIG=default-sp:SP_PSA_CRYPTO_CONFIG=default-opteesp:SP_PSA_ATTESTATION_CONFIG=default-opteesp - smmgw= MEASURED_BOOT=n:SPMC_TESTS=n:TS_SMM_GATEWAY=y:TS_UEFI_TESTS=y:DEFAULT_SP_CONFIG=default-sp:SP_PACKAGING_METHOD=fip; - optee-spmc-test=MEASURED_BOOT=n:SPMC_TESTS=y:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=embedded:DEFAULT_SP_CONFIG=default-opteesp; **Test results** All tests passed with the following exceptions: - psa-ps-api-test: -- TEST: 414/Check 1/Checkpoint 1 fails.

The release has been tested with with OP-TEE manifest "master:2b88dac" with the following modifications: - Trusted Services version changed to ` v1.0.0_rc0`1` - Some fixes applied to OP-TEE/build. For details please see: https://github.com/OP-TEE/build/pull/683. At the time the test was executed changes were already accepted but not merged by maintainers - Version of all components: - optee/manifest: 2b88dac - buildroot: d48a8beb; tag: 2022.11.1 - edk2: dd4cae4d82 - edk2-platforms: 02daa58c21 - grub: e54c99a; grub-2.02 - linux: ca87e77a2; tag: v6.1.34 - linux-arm-ffa-tee: a2d7349: arm-gitlab/tee-v2.0 - linux-arm-ffa-user: 18e3be7 tag: debugfs-v5.0.1 - mbedtls: dd79db100; tag: v2.28.1 (For TF-A) - optee_client: 8533e0e; tag: 3.22.0 - optee_examples: 5f1edb13c - optee_os: 5f1edb13c - optee_test: e1b6445 - trusted-firmware-a: 9881bb93a; tag: v2.8 - trusted-services: f188329b27d4163: tag: v1.0.0_rc01 The above dependency configuration can be set using the attached local manifest file: {F418181}2} **Test configuration**: - The following test set-ups were used for validation: -- "host-test": execute all test on the X86 host running the test system. -- "optee-spmc-test": execute the "ffa_spmc" test groug of xtest. -- "psa-ts-embedded": in this configuration ITS and PS is using Block Storage as the storage backend. SPs use embedded packaging and default to raw-binary format. BLK, PS and ITS is using the elf format. In this configuration PSA and TS tests are executed. -- "psa-ts-fip": In this configuration SPs use "fip packaging" and the default binary format is "elf". BLK is using the raw-binary format. ITS and PS is using separate dedicated backends which store data to RAM buffers. In this configuration PSA and TS tests are executed. -- "smmgw:" This configuration uses "fip packaging" and the SP binary format is "elf". Only the "uefi-test" is executed. **Build options:** - psa-ts-embedded= MEASURED_BOOT=y:SPMC_TESTS=n:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=embedded:DEFAULT_SP_CONFIG=default-sp:SP_BLOCK_STORAGE_CONFIG=default-opteesp:SP_PSA_ITS_CONFIG=shared-flash-opteesp:SP_PSA_PS_CONFIG=shared-flash-opteesp - psa-ts-fip= MEASURED_BOOT=y:SPMC_TESTS=n:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=fip:DEFAULT_SP_CONFIG=default-opteesp:SP_BLOCK_STORAGE_CONFIG=default-sp:SP_PSA_CRYPTO_CONFIG=default-opteesp:SP_PSA_ATTESTATION_CONFIG=default-opteesp - smmgw= MEASURED_BOOT=n:SPMC_TESTS=n:TS_SMM_GATEWAY=y:TS_UEFI_TESTS=y:DEFAULT_SP_CONFIG=default-sp:SP_PACKAGING_METHOD=fip; - optee-spmc-test=MEASURED_BOOT=n:SPMC_TESTS=y:TS_SMM_GATEWAY=n:TS_UEFI_TESTS=n:SP_PACKAGING_METHOD=embedded:DEFAULT_SP_CONFIG=default-opteesp; **Test results** All tests passed with the following exceptions: - psa-ps-api-test: -- TEST: 414/Check 1/Checkpoint 1 fails.